alex/arduino-filament-dryer
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ouch finger

Browse Source
This commit is contained in:
alex
2026-07-08 22:17:23 +02:00
parent 2fe53d5a8a
commit d1385baa45
11 changed files with 865 additions and 189 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -101,7 +101,7 @@ Verify access: `test -w /dev/ttyUSB0 && echo ok`
Emergency cutoff is fixed at **70°C** — you can autotune at 50–55°C with ABS in the chamber while hot corners stay below that.
5. Dry at your target — fan runs at the stir PWM (default **178**) unless you override with `fan <pwm>`; `fan auto` returns to the default.
5. Dry at your target — fan runs at stir PWM (default **178**) whenever target > 0, including heat-up. Override with `fan <pwm>`; `fan auto` returns to default. Fan auto-off below 40°C applies only in idle (`target 0`).
Send `help` over serial for all commands (`target`, `fanchars`, `fan`, `log on/off`, `status`, `pid`, etc.).